Find a local pool service provider

Poolpages

Step 1 of 4

First, your area

Where are you based?

We look for providers who offer your chosen service in your area.

National guide

Pool Fence Cost in Australia: Glass, Aluminium and Steel

Pool fence cost depends on total length, material, gates, access, ground conditions, fixing method, removal work, and the compliance needs of the site.

Updated September 2026

Pool fencing is normally priced by the total length, material, number of gates, and installation difficulty. A straight aluminium run on level ground usually costs less than frameless glass around steps, corners, retaining walls, or difficult access. Compare complete installed quotes rather than panel prices alone.

What affects the total cost?

  • Total linear metres and number of corners
  • Aluminium, steel, semi-frameless glass, frameless glass, or mixed materials
  • Number, width, and hardware specification of gates
  • Concrete, timber, soil, paving, or retaining wall fixing points
  • Sloping ground, steps, level changes, and custom panels
  • Access for workers, glass, tools, and waste removal
  • Demolition and disposal of the old barrier
  • Work needed to correct non-climbable zones or boundary issues

Aluminium pool fencing

Aluminium is widely used for long boundaries and practical family pool areas. It is relatively light, resists corrosion when properly finished, and is usually less expensive than glass. It creates a more visible barrier, so panel style and colour have a strong effect on appearance.

Glass pool fencing

Glass preserves sightlines and can make a compact pool area feel more open. Frameless systems use specialised spigots and thicker panels, while semi-frameless systems use posts. Precise measuring, heavy panels, quality hardware, and careful fixing generally make glass more expensive to supply and install.

Steel and mixed-material fencing

Steel can suit architectural designs, but coating, maintenance, and corrosion exposure need careful consideration. A mixed layout often provides better value. Glass can be used beside entertaining areas, with aluminium on side or rear boundaries where uninterrupted views matter less.

Costs that quotes may exclude

Confirm whether the price includes site measure, design, engineering where needed, gates, hinges, latches, core drilling, concrete footings, demolition, disposal, electrical or plumbing relocation, and final adjustments. Check product and workmanship warranties and ask who is responsible if the finished layout does not pass inspection.

How to get useful quotes

Give each installer the same scope, rough measurements, photos, access information, and any defect report. Ask for an on-site measure before accepting a final price. The installer should explain how fence height, gates, gaps, and non-climbable zones will be handled under the rules that apply to your property.

Do not trade compliance for a lower price

Moving a gate, adding a custom panel, or addressing raised ground can increase the initial cost, but ignoring these issues may lead to failed certification and expensive rework. Confirm the proposed design before new paving, landscaping, or equipment locks in the surrounding levels.

Frequently asked questions

Which pool fencing material is usually cheapest?

Aluminium is commonly more affordable than glass, particularly for long fence runs. Site conditions and gate requirements still affect the price.

Do pool fence quotes include gates?

Not necessarily. Confirm gates, hinges, latches, fixings, demolition, disposal, custom panels, and compliance work in writing.

Can glass and aluminium fencing be combined?

Yes. A mixed design can preserve views in key areas while controlling cost along less visible boundaries.